Fonction et param¨¨tres
|
Programme de l¡¯examen |
R¨¦sultat de l¡¯examen |
Moyen de l¡¯examen |
| Intensit¨¦ de traction |
ASTM D638 |
¡Ý20Mpa |
| Taux cass¨¦ de traction |
ASTM D638 |
¡Ý500% |
| Aaux vertical contract¨¦ |
ASTM D2671 |
¡À5% |
| Taux de r¨¦sistivit¨¦ de volume |
ASTM D149 |
¡Ý25kv/mm |
| Taux de r¨¦sistivit¨¦ de volume |
ASTM D257 |
©ƒ1014¦¸.cm |
| Taux de reprise d¡¯humidit¨¦ |
ASTM D570 |
¡Ü0.2% |
| Densit¨¦ |
ASTM D792 |
1.22g/cm3 |
| Taux d'adh¨¦sion partielle |
ASTM D792 |
©‚30% |
| Temp¨¦rature complete contract¨¦e |
ASTM D792 |
130¡À5¡æ | |
TECHNICAL&USED
¡ñProduct from heat-shrink and low-melting polymer adhesive layer.
¡ñProduct heating, melting outer shrink, the inner layer, so that is protective seal charged body, the integration of insulated.
¡ñMain use: minor caliber pipe, stainless steel and other hard objects outside coating, reinforcement, such as acoustic tube, concrete connection buried pipes, corrosion-resistant and waterproof.
¡ñInstallation: the materials supplied by 5CM lap, heating guns from one end to the other end of the uniform baking, to shrink after the inner layer at the Sol along the cascade, uniform effuse cooling after the self-contained.
ORDER GUIDE
¡ñSubscription products indicate the color, size, length, unspecified by company factory packaging standards, the company provides the service, press the trim 0.03 Yuan/m trim costs calculation, trim way uses the computer micro-cutting technology.
¡ñProduct color: black, other colours required customization.
Technologie et utilisation
|
Sp¨¦cification technique(mm) |
Avant de contracter |
Apr¨¨s avoir contract¨¦ |
emballageM/ROLL |
|
Diam ¨¨tre interne ID(mm) |
¨¦paisseur du mur(mm) |
Diam ¨¨tre interne ID(mm) |
¨¦paisseur du mur(mm) |
| MWPC |
MWPC-§¶Ø30/8 |
30+1 |
1.0+0.1 |
8.0-1 |
2.4¡À0.1 |
1¡«1.22m/pc |
| MWPC-§¶Ø30/12 |
30+1 |
1.0+0.1 |
12.0-1 |
2.0¡À0.1 |
1¡«1.22m/pc |
| MWPC-§¶Ø35/14 |
35+1 |
1.0+0.1 |
14.0-1 |
2.0¡À0.1 |
1¡«1.22m/pc |
| MWPC-§¶Ø40/16 |
40+1 |
1.0+0.1 |
16.0-1 |
2.0¡À0.1 |
1¡«1.22m/pc |
| MWPC-§¶Ø50/20 |
50+1 |
1.0+0.1 |
20.0-1 |
2.2¡À0.1 |
1¡«1.22m/pc |
| MWPC-§¶Ø65/25 |
65+1 |
1.0+0.1 |
25.0-1 |
2.2¡À0.1 |
1¡«1.22m/pc |
| MWPC-§¶Ø75/30 |
75+1 |
1.0+0.1 |
30.0-1 |
2.2¡À0.1 |
1¡«1.22m/pc |
| MWPC-§¶Ø85/35 |
85+1 |
1.0+0.1 |
35.0-1 |
2.2¡À0.1 |
1¡«1.22m/pc |
| MWPC-§¶Ø95/40 |
95+1 |
1.0+0.1 |
40.0-1 |
2.3¡À0.1 |
1¡«1.22m/pc |
| MWPC-§¶Ø100/45 |
100+1 |
1.1+0.1 |
45.0-1 |
2.3¡À0.1 |
1¡«1.22m/pc |
| MWPC-§¶Ø120/50 |
120+1 |
1.1+0.1 |
50.0-1 |
2.4¡À0.1 |
1¡«1.22m/pc |
| MWPC-§¶Ø150/60 |
150+1 |
1.1+0.1 |
60.0-1 |
2.5¡À0.1 |
1¡«1.22m/pc |
| MWPC-§¶Ø160/60 |
160+1 |
1.1+0.1 |
60.0-1 |
2.7¡À0.1 |
1¡«1.22m/pc |
| MWPC-§¶Ø180/60 |
180+1 |
1.1+0.1 |
60.0-1 |
3.0¡À0.1 |
1¡«1.22m/pc |
| MWPC-§¶Ø200/60 |
200+1 |
1.1+0.1 |
60.0-1 |
3.3¡À0.1 |
1¡«1.22m/pc | |
